Important Steps of Trenchless Pipe Bursting

3 Important Steps of Trenchless Pipe Bursting

Trenchless Pipe BurstingIn the pipe and sewer industry, Trenchless technology is becoming more of a buzzword. As with all other slogans, however, the more it is being used, the less people understand its implication. To understand what it is lets understand what Trenchless Pipe Bursting entail;

Trenchless Pipe Bursting

When it comes to Trenchless technology, one of the essential concepts to appreciate is pipe bursting. Pipe bursting is a method that assists in repairing underground gas, water, and sewer pipes that are old, damaged, or undersized. One of the pros of this procedure is that no trench is required; therefore, your lovely landscape will not be dented. Also, there will be no need of removing the old pipe since the new pipe will be stretched into place. These are only a few of the benefits of the technique; nevertheless, you should also understand crucial steps of the process. There are 3 important steps of Trenchless pipe bursting and they include:

Step 1 – Equipment Installation

First, two small openings are tunneled; one at the starting point and the other at the ending point. This could be small holes in the yard or just small entrance points above a manhole or in the basement. Between these two openings, no trench is required. At the starting point, the machine to effect pipe bursting is situated, while at the end point, a long cable is introduced through the existing pipe until it is attached to the machine. The cable will be used to pull the new pipe over the existing one.

Step 2- Pipe Creation and Installation

After step 1 is complete, the new pipe should be set for installation. The new pipe is placed at the ending point and attached to a bursting head that is linked to the cable. The new pipe is often smaller than the existing pipe and is created from segments that are welded concurrently; therefore, the drain or sewer pipe might not be straight due to the joints.

While the machine pulls the cable, the cable will in turn pull the pipe and the bursting head. The head will be powered into the old pipe where it fractures the existing pipe making room for the new pipe.

Step 3- Disassembling Equipment and Doing the Final Touches

When the bursting head makes its way through the existing pipe and reaches the machine; then, Trenchless pipe bursting process is deemed complete. It means that the old pipe has been removed and the new pipe has been mounted. After the new pipe is positioned, the head can be disjoined from the cable, which can then be separated from the pipeline.

The openings (at the starting and end point) should be covered or sealed. Flooring material can be placed back, and the site will look impeccably similar to before the process began. The sewer pipes can now be relinked to the main drain.

Final remarks

One of the Best pipe repair techniques is Trenchless pipe bursting. The steps to this technique are straightforward, environmental friendly, and save you time and money. Therefore, if you encounter sewer problem, ensure the plumbing company that you contract uses Trenchless technology for better results.

Leave a Reply

Your email address will not be published. Required fields are marked *